top of page

Aussie Clear

AUSSIE CLEAR is an oil-based Exterior Timber Finish that protects hardwoods from the weather.  Its penetrative quality allows the enhancement of the natural grain and beauty resulting in a natural oiled look. AUSSIE CLEAR stabilises timber as it repels moisture, reducing checking or splitting.  No film is allowed to form, so peeling or cracking is never a problem.  It also inhibits unsightly mould growth with its powerful mouldicide.  It has been specially formulated and tinted to use on a broad range of hardwoods.

Recommended Uses

AUSSIE CLEAR can be used wherever a clear protective exterior finish is required.  This includes decking, fencing, trellis and pergolas, weatherboards, window frames, furniture, cladding, facia etc. such
AUSSIE CLEAR  Timber finish/ decking oil is suitable for all popular timbers including Cedar, Merbau, Jarrah, Cypress Pine, Spotted Gum etc.  It has been formulated with its own “transparent” pigment to appear clear on darker hardwood timbers.

Aussie Clear Products

Use Preschem TREATED PINE CLEAR on CCA Treated Pine on Radiata pine or Oregon.

AUSSIE CLEAR is recommended for mid to dark toned hardwoods such as Merbau, Spotted Gum.

Which product to use for darker and lighter timber

AUSSIE CLEAR is recommended for mid to dark toned hardwoods such as Merbau, Spotted Gum. AUSSIE CLEAR LIGHT is for the blond to mid-toned timber such as Blackbutt, Silvertop

Ash, and Cypress Pine.

Aussie Clear being used on Boat Floorboards

Directions For Use

Apply AUSSIE CLEAR dry surfaces, free from dirt grease and wax. Previously varnished or painted surfaces must be thoroughly stripped. Badly weathered surfaces should be sanded back or cleaned using a wood cleaner such as Preschem’s GREY DECK CLEANER. It can be applied by any convenient means, such as brush, roller, spray or dip application, however, floors & decks are most easily applied with a lambswool applicator. Apply one coat of AUSSIE CLEAR, working it into the timber. Any excess oil, remaining on the surface after one hour should be wiped off. If the timber still looks dry, another application may be required. Allow 24 hours for thorough drying.


Timber treated with carefully formulated wood finishes such as the AUSSIE CLEAR decking oil will not blacken when maintained regularly. However, over time and depending on the severity of exposure, the rich colour of the timber will fade. Repeat applications are simple as the timber can be re-oiled to bring back the rich natural timber texture.


Sawn approx 8-9 m2/Litre.

Dressed approx 11-12 m2/Litre

Clean Up


Aerosol Can

1, 4, 10 and 20-litre cans and 200 litre drums.

Safety Instructions

Avoid skin contact by wearing protective clothing. Don’t breathe vapour of spray mist.

First Aid Instructions

If poisoning occurs, contact a doctor or Poison Information Centre (13 11 26).

Hold eyes open, flood with water for at least 15 minutes – see a doctor.

Remove contaminated clothing and wash skin thoroughly with soapy


Remove to fresh air.

If Swallowed
DO NOT induce vomiting. Give a glass of water to drink and transport to hospital.

Aussie Clear Products
Aussie Clear Products 1
Aussie Clear Products 2
Aussie Clear Products 3
bottom of page